TitleProduct

Industrial Wood Treatment Autoclave for Manufacture

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Shanghai

  • Validity to:

    Long-term effective

  • Last update:

    2017-12-12 12:43

  • Browse the number:

    219

Send an inquiries

Company Profile

Shanghai Uwants Technology Development Co., Ltd.

By certification [File Integrity]

Contact:Ms. Cathy(Mr.)  

Email:

Telephone:

Phone:

Area:Shanghai

Address:Shanghai

Website: http://uwants.hnjlfs.com/

Product Details


Shanghai Uwants Wood Autoclave
Usage:
Wood impregnating equipment can be used for wood preservation, wood flame-resistant, wood coloring, mainly for timbers.


Principle:
It combines vacuum and pressurizing.
A Vacuum: suck out air out of tank and wood cells, which makes it easy for chemical agent to be absorbed into wood cell.
B: Pressurizing: help chemical agent go into wood cell with pressure.
Working process:
A. Inicial vacuum:suck air out of tank and wood with vacuum pump and keep the vacuum status 15minute to 1 hour according to treatment aims. Vacuum status is good for agent liquid goes into wood.The vacuum degree can be 0.098MPa.
B .Agent liquid adding: under condition of vacuum pump agent liquid into tank.
C .Pressurizing:When tank is full of agent liquid, pressurize tank with pressure pump.The pressure inside tank will rise slowly to rated pressure.Then keep the tank under rated pressure until wood have absorbed enough agent liquid.
D. Pressure discharging:When wood have absorbed enough agent liquid,discharge inside pressure and agent liquid that have not been absorbed.
E. final vacuum:when the rest agent liquid has been discharged,suck air out of tank and wood with vacuum pump again to make redundant agent liquid exude from wood cells or surface to avoid liquid drops.
Size of impregnation tank: Effective length 4-16meters, effective diameter 1-2.4meters, depends on customer requirements.

Features

1) Wood treatment equipment apply to be preservation, termite proof and to prevent fungal. Especially outdoor wood floor, landscape floor, outdoor wood platform and wood plank road and other preservative wood pergola.
2) This treatment equipment have special craft for wood, such as: vacuum pressure method, fullcell method, high low frequency pressure as so on. Especially vacuum pressure method. The preservative level can get C4.
3) You can use CCA and ACQ two kinds of preservative match our wood preservation equipment.
4) PLC is a new intelligent control wood preservative system, which make the wood preservationequipment to be easy, and to be safety, to be reliable. Meanwhile, Even if the wood don't be push out, this can accurately calculate if the preservative is permeated in the wood.



Parameter range:
 
Item Parameter
Working pressure -0.08MPa--3.6MPa
Working temperature 0--200°c
Vacuum degree(relative) 0.098MPa
Capacity ( one time ) 2 / pot--20 /pot
Length 4-16meters
Diameter 1-2.4meters


After-service:


1, service network
The service network is Distributed in national regions and form a complete set of supporting offices, formed a sound service network, the user services will be in place in 48 hours, convenient and efficient.
2, pre-sale service
According to user requirements, we will offer a variety of designs; help the user to select the most appropriate equipment; More for the sake of users, to design a floor plan for the users, and also a reasonable configuration.
3, installation and debugging
Company has experienced professional technicians and senior workshop technicians for free on-site training of buyer's operators and responsible for the guidance of equipment installation, guarantee the operation of the equipment, and to achieve the desired effect.
4, On-site service
Since the date of installation, the company will send an engineer for on-site guidance, to supply a timely solution of equipment normal state can not run, which due to the unskillful operators who are not familiar with our machine, and guide the users to grasp the solution of the problems during using the equipment.
5, after-sales maintenance
Since the date of Qualification adjustment, one year warranty, guarantee the quality of the product if non-users artificially, my company free repair. Since the end of the product warranty period, the supplier provide maintenance service for life, and should be paid to provide accessories, appropriate preferential charge for repairs. The supplier upon receipt of buyer's notification of the equipment failure, maintenance personnel can be arrived at the scene within 48 hours.
6, operation training
Detailed work instructions, professional and technical personnel on-site guidance operation; Regular training for each operator, to make them truly knowledgeable, systematic and professional.