Product Details
Overview
GLai Benchtop Temperature and Humidity Test Chamber series provides an economical and space-saving solution for a variety of testing requirements. The chamber's interior size is 4 inches wider than traditional benchtops, yet the exterior is 20% narrower.
◠Lowest temperature: -20 or -70°C (-4 or -94°F)
◠Highest temperature: 150°C (302°F)
â— Humidity range: 20 to 95% RH
â— Chamber size: 1.5 or 4 cubic feet
â— Touch-screen Watlow F4T programmer with Ethernet access
â— High performance and quiet operation (65 dBa)
â— Space-saving footprint, designed for flush installation to wall
â— Stainless steel exterio
The four cubic foot workspace is the largest to be found in a benchtop unit, while requiring less footprint than even smaller comparable chambers. The vertical configuration saves bench space, plus the refrigeration’s ventilation design allows installation against a wall for even more space savings.
The programmer includes a temperature alarm . A thermal fuse and a user-set independent limit are also included. In addition, a specimen power terminal allows the user to safely operate powered equipment inside or with the chamber.
Specification
Sizes of Temperature Chambers |
Model |
Volume (L) |
Temperature Range
(°C) |
Rated Power |
Internal Dimension (mm) W*H*D |
External Dimension (mm) W*H*D |
MiniT64 |
64 |
-20~150°C |
3.3KW |
400*400*400 |
600*1400*1004 |
-40~150°C |
4.2KW |
-70~150°C |
4.2KW |
MiniT180 |
180 |
-20~150°C |
5.7KW |
600*600*500 |
800*1750*1204 |
-40~150°C |
8.4KW |
-70~150°C |
8.4KW |
MiniBT64 |
64 |
-20~150°C |
2.0KW |
400*400*400 |
560*830*1200 |
-40~150°C |
2.2KW |
-70~150°C |
3.5KW |
Basic Specification |
Performance |
Temperature Range |
A: -20~150°C, B: -40~150°C, C:-70~150°C, D: or customized |
Temperature Fluctuation |
±0.5°C |
Temperature Uniformity |
±2.0°C |
Ramp Rate |
1~3°C/min for heating (non-linear, based on on-load)
0.7~1.0°C/min for cooling (non-linear, based on on-load)
Note: can be customized as per requirement |
Material |
External Casing |
Cold-rolled A3 (Q235) steel plates with plastics painted. |
Interior Working Room |
Stainless Steel Plates SUS304 with miror surface |
Heat Isolation |
Polyurethane foams and fine glass fibres |
Illumination Lamp |
One illumination lamp in per standard test chamber. |
Casters |
4pcs, with PU covered for protection. Height adjustable and direction universal. |
Viewing Window |
Multi-layer hollow toughened glass with conductive films for heating to defrost |
Door |
Manually operated sliding door with unlock button |
Heating & Cooling System |
Heater |
Steipped Nickel-chromium Wire Heater |
Air Blower |
Anti-temperature stainless fan blades with low noise |
Compressor |
Hermetically-sealed Techmesh® or semi-sealed Bitzer® or GEA® or equivalent compressors |
Cooling Method |
Single or dual cooling (Air-cooled or Water-cooled) |
Refrigerant |
R404A or/and R23 (eco-friendly) |
Condenser |
Plate-type heat exchanger |
Control System |
Controller |
7inch" Programmable colorful touch-screen display
LCD English Display
Microcomputer integrated controller |
Functions |
Data Record (Max 1500 days x 24hrs/per min), History Curve, USB data download & upload, Remote controlling through PC, Automatic protection alarms, etc. |
Program |
1~100 programs, 1~100 steps for per program, Max 99hrs 59mins for per program. 99 programs can be interlinked. |
Temperature Sensor |
Platinum Resistance.PT100Ω |
Running Model |
Constant/Fix-value Model and Programmable Model |
I/O Interface |
Communicate port (RS485) to connect test chamber to a PC |
Standard Configuration |
Test Chamber x 1, Specimen Holder Shelf x 2, φ50mm Cable Access Port x 2 with 2 soft plug, EMO x 1, Tri-color Indicator x 1, etc. |
Safety Protection |
Power leakage protection/Compressor over-heat, over-load or over-current protection/Dry burning protection. |
Voltage |
AC220V/380V/440V±10%, 50Hz/60Hz or as per requirement |
Ambient Enviromental for application |
5°C~+30°C ≤ 85%R.H |
Test Standards (not limited to) |
IEC60068-2-1
IEC60068-2-2
IEC60068-2-78
IEC60068-2-30 |
FAQ
1. Do you offer after-sales service? How can I ask for that? And how about the warranty?
Every machine from our factory has a 14-month warranty after shipment. Generally, we offer 12 months for the FREE
maintenance,while considering of sea transportation, we can extend 2 months for our customers.
If your machine doesn’t work, you can send E-mail to us and we will try our best to find the problem by email or sky video chat if necessary. After confirmation of the problem, we can send you new spare parts or provide on-site repair.
2. What's the delivery term?
At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20 working days after
deposit receipt. If you are in urgent need, we can consider making a special arrangement for you.
http://www.climate-testing.net/