Product Details
Product drawings
Working principle and product details
01 Product main image
Ignition electrode for wall-hung boiler
The ignition electrode (ceramic ignition needle) is mainly assembled from high temperature resistant alumina ceramics and resistant high temperature alloys, high temperature and high voltage wires, terminals, etc. It has the advantages of sensitive and reliable ignition, high temperature and oxidation resistance, and is widely used in liquefaction Intermittent ignition of LPG gas appliances (stove, water heater, barbecue stove, burner, gas lamp, heating stove, etc.).
02 Ceramic
Ceramic length:29.0mm Ceramic diameter:3mm-6.5mm
The 95% alumina is made of hot pressure casting slurry and sintered at a high temperature of 1500℃. It has the following advantages:
1. High mechanical strength and wear resistance;
2. Strong chemical resistance to acid and alkali.
3. Good electrical insulation performance at room temperature and high temperature.
4. Small mechanical strength loss under high temperature.
03 Electrode
Electrode material:Ocr25Al5 Cr20Ni80 Electrode length:Custom
Iron-chromium-aluminum resistance electric heating alloy has the characteristics of high resistivity, low temperature coefficient of resistance and high operating temperature;
Resistance electric heating alloy, this kind of alloy has stable structure, stable electrical and physical properties, good high temperature mechanical properties, good cold deformation plasticity, good weldability, and will not produce brittle fracture after long-term use. It is mostly used in the manufacture of household appliances and heating elements whose working temperature is below 1000℃, with long service life
04 Wire
Wire material: Teflon and glass fiber protective layer
Teflon wire performance characteristics:
1. It has excellent electrical insulation performance, high voltage resistance, low high frequency loss, no moisture absorption, and large insulation resistance;
2. It has excellent corrosion resistance, almost insoluble in any organic solvents, and can resist oil, strong acid, strong alkali, strong oxidant, etc.;
3. It has excellent flame resistance, aging resistance and long service life.
Advantages of glass fiber: good insulation, strong heat resistance, good corrosion resistance and high mechanical strength.
(1) High tensile strength and low elongation (3%).
(2) High elastic coefficient and good rigidity.
(3) The elongation is large within the elastic limit and the tensile strength is high, so the impact energy is large.
(4) It is an inorganic fiber with non-combustibility and good chemical resistance.
(5) Low water absorption.
(6) Good scale stability and heat resistance.
(7) Not easy to burn, it can be melted into glass beads at high temperature
05 Terminal
Various quick-connect terminals provide 2.8mm x 0.8 mm or 2.8mm x 0.5mm and 4.8 mm x 0.8 mm, SM terminals, sheath, and cold press ports
Production process
 |
 |
1.Raw material mixing |
2.Hot press injection molding |
 |
 |
3.High temperature firing |
4.Thermoforming |
 |
 |
5.Glazing |
6.Electrical measurement |
 |
 |
7.Sorting |
8.Assembly |
Packing method
 |
 |
 |
7-layer corrugated box |
7-layer corrugated box |
7-layer corrugated box |
Yangzhou Lisheng Ceramics Co., Ltd. was established on May 31, 2010 with a registered capital of 10 million yuan. Its business scope is: electronic ceramics and ceramic accessories processing and sales. Large quantities of products are exported, mainly to North America, Japan, Europe, Taiwan, Iran and other regions.
Yangzhou Lisheng Ceramics Co., Ltd. invested 3.5 million yuan in November 2015 to rent a 2358 m2 workshop located in Shuangbao Road, Liubao Industrial Concentration Zone, Baoying County, Baoying County Liubao Industrial Zone Development Co., Ltd., and purchased a slow mixer , Hot press forming machine, environmentally friendly gas pusher furnace, high temperature pusher electric furnace and other advanced equipment, with an annual output of 6 million electronic ceramics and ceramic accessories.
FAQ:
1.Are you a manufacturer or a trader？
We are a manufacturer with our own factory located in Jiangsu.
2.What is the main product of your company?
We are a company specializing in ignition electrodes and spark plugs. Our products are widely used in gas appliances.
3.Whether to provide sample service？
Yes
4.How to contact you？
Alibaba online shop：yzlstc.en.alibaba.com
E-mail:.Whatsapp:+8615995105552；
5.How long does it take from order to delivery；
It depends on the quantity of your order, usually around 10 days.
6.Can you provide customized services？
Yes, we can provide customized services.
http://www.cnignitionelectrode.com/
Company Profile
