5052 aluminum plate is Al Mg alloy aluminum plate. Magnesium is the main alloy element in 5052 alloy aluminum plate. It is the most widely used antirust aluminum. This alloy has high strength, especially fatigue strength: high plasticity and corrosion resistance, can not be strengthened by heat treatment, good plasticity in semi cold work hardening, low plasticity in cold work hardening, good corrosion resistance, good weldability and poor machinability , can be polished. Aluminum magnesium alloy also contains a small amount of manganese, chromium, beryllium, titanium, etc. In addition to a small amount of solid solution, most of the manganese in the alloy forms mnal6. The effect of chromium in 5052 aluminum plate is similar to that of manganese, which can improve the ability of stress corrosion cracking resistance, increase the strength of base metal and weld, and reduce the tendency of welding cracks, but the content of chromium is generally less than 0.35%.
Product Name | 5052 Aluminum Plates/Sheets |
Thickness | 0.3mm-350mm |
Width and Length | 1220*2440mm,1250*2500mm,1500*3000mm(6mm above, size can be customized) |
Temper | H24 |
Grade | 5052 |
Material Type | Aluminum Alloy |
Chemical composition | Aluminum al: margin Silicon Si: ≤ 0.25 Copper Cu: ≤ 0.10 Mg: 2.2 ~ 2.8 Zinc Zn: ≤ 0.10 Manganese Mn: ≤ 0.10 Cr: 0.15-0.35 Iron Fe: ≤ 0.40 Note: single: < 0.05; total: < 0.15 |
Mechanical property | Tensile strength (σ b): 170 ~ 305mpa Conditional yield strength σ 0.2 (MPA) ≥ 90 Modulus of elasticity (E): 69.3-70.7gpa The annealing temperature is 345 ℃. |
Further processing | Casted,Precision,Anodised,Bright,embossed,spray coating |
Quotation Terms | EXW,FOB ,CFR,CIF |
Production Time | 3-40days Base on the quantity |
Place of Origin | China |
MOQ | 100kg |
FOB Port | Shanghai/Ningbo/Suzhou |
Packing Tems | Packed with Protective Film ,wrap with sack before putting into pallet |
Payment Terms | 30%TT deposit,70%TT before shipment. |
Application
It is mainly used for low load parts that require high plasticity and good weldability and work in liquid or gas medium, such as oil tank, gasoline or lubricating oil conduit, various liquid containers and other small load parts made by deep drawing: wire rod is used for rivets.
Surface 5052 aluminum alloy sheet?
1. Cracks, corrosion spots and traces of nitrate are not allowed on the surface.
2. The surface is allowed to have peeling, bubble, surface coarse exceeding and local mechanical damage with the depth not exceeding 8% of the nominal size of the wall thickness of the part where the defect is located, but the maximum depth of the defect shall not exceed 0.5mm, and the total area of the defect shall not exceed 5% of the total area of the plate.
3. The supplier is allowed to polish the profile longitudinally until the surface is smooth.
4. Other requirements: formulated by the demander and the supplier
5. The surface of the aluminum plate is bright and free of scratches. There are few pieces of mechanical pressed plates
Process performance
(1) formability
The alloy has good plasticity in the hot process. The forging and die forging temperature is 420 ~ 475 ° C, and the deformation rate is more than 80% in this temperature range.
The cold stamping performance is related to the alloy state. The cold stamping performance in annealed (o) state is good, followed by H32 and H34 state, but not H36 / h38 state.
(2) welding performance
The properties of gas welding, arc welding, resistance welding, spot welding and seam welding of the alloy are good. The brazing performance is good, but the soldering performance is poor.
The strength and plasticity of the weld are high, and the strength of the weld is 90% ~ 95% of the strength of the base metal. However, the air tightness of the weld is not high. 5A03 alloy is recommended as the solder, which can improve the air tightness and eliminate the tendency of cracks.
(3) machining performance
The machinability of the alloy in annealed state is not good, but it is improved in cold work hardening state.
![](http://www.eq-metal.com/Content/uploads/2021596197/202103261542352ba16436d4784e2b8c44ba26136ba67b.jpg)
![](http://www.eq-metal.com/Content/uploads/2021596197/20210326154245ee8c92ea856e4032aad80e6b01c71560.jpg)
![](http://www.eq-metal.com/Content/uploads/2021596197/202103261542546e4f9bc77e0b4233a25372964745f379.jpg)
![](http://www.eq-metal.com/Content/uploads/2021596197/20210326154313ed027391a92940c5bd0d86534fd341b9.jpg)
![](http://www.eq-metal.com/Content/uploads/2021596197/202103261543230a5dbb94c4f94c3692af66822eb3db9e.jpg)
![](http://www.eq-metal.com/Content/uploads/2021596197/20210326154333a50bf89195f84c39b30df3e869bc2196.jpg)
FAQ
Q:Can you give us a quotation right now?
A: Please give us detailed technical data,such as material grade,,length,width,thickness,,quantity. Then we will make a design and quotation for you as soon as possible.
Q: Do you provide your products catalogue?
A: Of course, I will send it to your E-mail if it's convenient to you.
Q: Can you do customized design and size?
A:Yes, ODM &OEM are available.
Q: What are your payment terms?
A: We accept T/T, Cash,West Union,Paypal,Credit Card,etc.
Q: What’s your delivery time?
A: 10-35 days after received the advance payment .
Q: Do you supply other products?
A: Yes, our main products include extruded aluminum bar,aviation aluminum plate,customized aluminum forged parts,big aluminum flange etc.
At the same time, different dimension can be customized .Welcome your inquiry.
http://www.eq-metal.com/